Top view. Queensland Government aerial imagery (6 cm, 2022) where available, otherwise satellite. Lot 207/EH1872.
Unreviewed draft. Outline from satellite tracing. Roof planes fitted through the Queensland Government 2016 laser survey points classified as building; facets and edge lines are where those fitted planes meet, with boundaries inferred where points are sparse. Material, storeys and condition read from the 2022 aerial and street photos. Facets cover 97% of the outline. Not a survey; an estimator confirms the address, buildings and geometry on site before ordering.
Top view. Queensland Government imagery (6 cm, 2022) where available, otherwise satellite.
Street view. We do not hold oblique aerials, so material, storeys and condition are read from the street.
Total line lengths: ridges 9.5 m, hips 0.0 m, valleys 0.0 m, barges 23.0 m, eaves 29.1 m, wall abutments 19.4 m. Lengths are plan lengths in metres, rounded to 0.1 m; segments under 1.2 m are not labelled.
Pitch in degrees from horizontal per facet, from the fitted laser planes. Arrows point down the slope. Facets under 2° are shown as flat.
| Pitch | Plan area | True area | Share |
|---|---|---|---|
| 57° | 127 m² | 234 m² | 91% |
| 1° | 13 m² | 13 m² | 9% |
Plan area per facet in square metres. Total plan area 144 m² over 6 facets; true (sloped) area 254 m².
Facets are lettered for reference on site. Space below for the estimator's notes.
| Pitch | Plan area | True area | Share |
|---|---|---|---|
| 57° | 127 m² | 234 m² | 91% |
| 1° | 13 m² | 13 m² | 9% |
| Allowance | 0% | 5% | 10% · recommended | 15% |
|---|---|---|---|---|
| Sheet area | 254 m² | 266 m² | 279 m² | 292 m² |
| Lineal metres at 700 mm cover | 362 lm | 381 lm | 399 lm | 417 lm |
Sheet area only, at KLIP-LOK CLASSIC 700 0.42 cover width. The recommended column is the engine's waste allowance for this roof shape; the internal calculation orders 0 lm, including the pairing allowance on raked planes and ordered-length rounding. Cappings, valley trays and flashings are additional, from the length totals. A budgeting allowance, not a cut list.