Top view. Queensland Government aerial imagery (6 cm, 2022) where available, otherwise satellite. Lot 64/RP144801.
Unreviewed draft. Outline from satellite tracing. Roof planes fitted through the Queensland Government 2016 laser survey points classified as building; facets and edge lines are where those fitted planes meet, with boundaries inferred where points are sparse. Material, storeys and condition read from the 2022 aerial and street photos. Facets cover 98% of the outline. Not a survey; an estimator confirms the address, buildings and geometry on site before ordering.
Top view. Queensland Government imagery (6 cm, 2022) where available, otherwise satellite.
Street view. We do not hold oblique aerials, so material, storeys and condition are read from the street.
Total line lengths: ridges 16.3 m, hips 0.0 m, valleys 0.0 m, barges 26.0 m, eaves 36.8 m, wall abutments 35.1 m. Lengths are plan lengths in metres, rounded to 0.1 m; segments under 1.2 m are not labelled.
Pitch in degrees from horizontal per facet, from the fitted laser planes. Arrows point down the slope. Facets under 2° are shown as flat.
| Pitch | Plan area | True area | Share |
|---|---|---|---|
| 15° | 83 m² | 86 m² | 47% |
| 13° | 51 m² | 52 m² | 29% |
| 14° | 26 m² | 27 m² | 15% |
| 18° | 17 m² | 18 m² | 10% |
Plan area per facet in square metres. Total plan area 182 m² over 8 facets; true (sloped) area 188 m².
Facets are lettered for reference on site. Space below for the estimator's notes.
| Pitch | Plan area | True area | Share |
|---|---|---|---|
| 15° | 83 m² | 86 m² | 47% |
| 13° | 51 m² | 52 m² | 29% |
| 14° | 26 m² | 27 m² | 15% |
| 18° | 17 m² | 18 m² | 10% |
| Allowance | 0% | 5% | 10% · recommended | 15% |
|---|---|---|---|---|
| Sheet area | 188 m² | 197 m² | 207 m² | 216 m² |
| Lineal metres at 762 mm cover | 246 lm | 259 lm | 271 lm | 283 lm |
Sheet area only, at CUSTOM ORB 0.42 cover width. The recommended column is the engine's waste allowance for this roof shape; the priced take-off orders 299 lm, including the pairing allowance on raked planes and ordered-length rounding. Cappings, valley trays and flashings are additional, from the length totals. A budgeting allowance, not a cut list.